Tuesday, October 20, 2020
Home Arduino Strarter Kit 5 Best Arduino Starter Kit for beginners

5 Best Arduino Starter Kit for beginners

Learning Arduino is great but it can be overwhelming when it comes to purchasing your starter kit to get started with Arduino. There are a lot of kits online .we have listed the our top 5 picks in this post.

1. Official Arduino Starter Kit

Sold By Arduino, this kit costs around $74.It is one of the most trusted and well-known kit in the community. Not only it has Most of the parts, but also it comes with a 170 page Project book. This project book contains 15 different project, with step by step guide.

This book is great for everyone who wants to start into the vast world of electronics, regardless of any prior knowledge. The project’s book is available in other languages besides English, like German, Italian, French, Spanish, Chinese, and Korean. That is also one of reason, this kit is loved by beginners.

The  Kit contains the following components:

  • Arduino Projects Book
  • Arduino UNO R3
  • USB cable
  • Breadboard 400 Pins
  • Easy-to-assemble wooden base
  • 9V battery snap
  • Solid core jumper wires (70)
  • Stranded jumper wire
  • Phototransistors (6)
  • 10KΩ Potentiometers (6)
  • Pushbuttons (10)
  • Temperature sensor TMP36
  • Tilt sensor
  • Alphanumeric LCD (16 × 2-character display)
  • LEDs (1 x Bright White, 1 x RGB, 8 x Red, 8 x Green, 8 x Yellow and 3 x Blue)
  • Small DC motor (6-9V)
  • Small servo motor
  • Piezo capsule
  • H-bridge motor driver L293D
  • Optocouplers 4N35 (2)
  • MOSFET Transistors IRF520 (2)
  • Capacitors (5 x 100nF, 3 x 100µF, 5 x 100pF)
  • Diodes 1N4007 (5)
  • Transparent gels (red, green, blue)
  • 40 pin male header strip
  • Resistors (20 x 220Ω, 5 x 560Ω, 5 x 1KΩ, 5 x 4.7Ω, 10 x 10KΩ, 5 x 1MΩ, 5 x 10MΩ)

2. Elegoo UNO Project Super Arduino Starter Kit

 

arduino starter kit

Sold BY Elegoo, this is also a popular kit for starting with Arduino. Costing around $40, this kit comes with more than just some basic parts. It comes with a lot of sensors like DHT11,HC-SR04 Ultrasonic sensor, stepper motor, etc. This project kit comes with everything you could need to get you started with learning Arduino. Everything in the kit was of good quality.

The included CD has a well thought out structure, instructions and tutorial manual, Arduino installation software, and code samples all available in several different languages. The tutorial covers something like 24 lessons starting with the basics and ending with some more advanced projects.

This kit contains the following components:

  • Elegoo UNO R3 (Compatible with Arduino Uno)
  • 16x2LCD Module (with pin header)
  • Breadboard
  • Expansion Board
  • Breadboard Power Supply Module
  • Joystick ModuleIR Receiver
  • Servo Motor (SG90)
  • Stepper Motor
  • ULN2003 Stepper Motor Driver Board
  • Ultrasonic Sensor
  • DHT11 Temperature and Humidity Module
  • 9V Battery
  • 65 Jumper Wire
  • USB Cable
  • Buzzer (Active and Passive)
  • Potentiometer
  • 5V Relay
  • Remote
  • Tilt Switch
  • Button (5)
  • 1 digit 7-segment Display
  • 4 digit 7-segment Display
  • LEDs (5x Yellow, 5x Blue, 5x Green, 5x Red, 1x RGB)
  • Photoresistor (2)
  • Thermistor
  • Diode 1N4007 (2)
  • P2N2222 NPN Transistor (2)
  • IC 74HC595 Shift Register
  • Resistor (120)
  • Female-to-male DuPont Wire (10)

3. Kuman for Arduino Project Complete Starter Kit

arduino starter kit 2

Kuman is already well known for its robotics chassis kit, but what most of us are unaware, is they also make good Arduino kits. This kit includes just about everything you need to get started with Arduino. There are no printed instructions, the CD contains some tutorials that guide to build using the various components but lacks explanation.

This kit contains the following components:

  • Kuman UNO R3 Development Board
  • USB cable
  • Prototype extension board
  • Mini breadboard
  • 5V stepper motor
  • ULN2003 stepper motor driver board
  • LEDs (5 x Red, 5 x Green, 5 x Yellow, 1 x three-color)
  • Vibration Sensor (2)
  • Flame sensor
  • LM35 temperature sensor
  • Infrared receiver
  • Photoresistor (3)
  • Keycap (4)
  • Key switch (4)
  • Adjustable potentiometer
  • Passive buzzer (piezo buzzer)
  • Active buzzer (tone generator)
  • Jumper cap
  • Large breadboard
  • Remote Control
  • 16 x 2 Screen LCD
  • Breadboard module
  • HC-SR04 module
  • Component box
  • DuPont line 10pin
  • Breadboard line (30)
  • 8*8 dot matrix
  • 1 digit 8 segment tube
  • 4-digit 8 segment tube
  • IC 74HC595
  • Battery Holder
  • Resistors (5 x 220Ω, 5 x 330Ω, 5 x 1KΩ, 5 x 10KΩ)
  • Battery 9V
  • 40pin pin header
  • Thermistor module
  • Touch sensor
  • CD with tutorial
  • Plastic box

4. Smraza Ultimate Starter Kit

arduino starter kits 2

Smraza Ultimate Starter Kit is a less popular but good kit as it cost just under $27.  it comes with over 30 parts and 150 common components that you can use for creating unique Arduino projects. It comes with a well-illustrated PDF with tutorials for more than 15 projects with all instructions and source codes included. The kit also comes with packaged in a convenient storage container.

This kit contains the following components:

  • R3 Controller Board
  • Breadboard Holder
  • 400 tie-points Breadboard
  • Servo Motor
  • 5V Relay
  • IC 74HC595
  • 5V DC Motor
  • Precision Potentiometer
  • Active Buzzer
  • 2N3904 Transistors (2)
  • 1N4148 Diodes (2)
  • DHT-11(Temperature and Humidity Sensor)
  • Photoresistor (2)
  • LEDs (5 x Yellow, 5 x Red, 5 x Green, 5 x Blue, 1 x RGB)
  • 12mm Buttons(large)(4)
  • 9V Battery adapter
  • USB Cable
  • 65*Jumper Wire
  • Resistors (50 each 330Ω, 10KΩ)
  • Fan
  • Keycap ( 1 x White, 1 x Yellow, 1 x Green, 1 x Red)
  • 4 digit 7-segment display

5. Geekcreit UNOR3 Basic Learning Starter Kit For Arduino

It is one of the less popular kits. For less $ 25, you get 36 different parts (or more than 100 in total), which is enough to get into electronics and programming.

This kit contains the following components:

  • Arduino compatible UNO_R3 development board
  • USB cable
  • Prototype extension board
  • Mini breadboard
  • 5V stepper motor
  • 2003 stepper motor driver board
  • LEDs (10 x Red, 10 x Green, 10 x Blue)
  • Vibration Sensor (2)
  • Flame sensor
  • LM35 temperature sensor
  • Infrared receiver
  • Photoresistor (3)
  • Key cap (4)
  • Key switch (4)
  • Adjustable potentiometer
  • Passive buzzer (piezo buzzer)
  • Active buzzer (tone generator)
  • Jumper cap
  • Large breadboard
  • Remote Control
  • 1602 Screen
  • 9G servos
  • Component box
  • 10p DuPont line
  • Breadboard line(approximately)1 x 220ohm resistance (30)
  • 8*8 dot matrix
  • 1 digit eight segment tube
  • 4 digit eight segment tube
  • IC 74HC595
  • Battery Holder
  • 1K resistor plug
  • 10K resistor plug
  • 9V battery
  • 2.54mm 40pin pin header

 

 

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Most Popular

KY-032 | OBSTACLE AVOIDANCE SENSOR

The KY-032 obstacle avoidance sensor is an infrared obstacle avoidance sensor. It comes with the 37 in 1 starter kit for Arduino. It helps...

HIH-4000 | Humidity Sensors

The HIH-4000  sensors are one of the highly efficient humidity sensors you can buy. The HIH-4000 is an analog humidity sensor. It is useful...

KY-026 | ARDUINO FLAME IR SENSOR

The KY-026 Arduino Flame Sensor is a low-cost starter sensor. It normally comes in the starter kit of Arduino like the ky-039. It can...

KY-039 | ARDUINO HEARTBEAT SENSOR

The KY-039 Heartbeat sensor is one of the cheapest sensors to get a start on Arduino like the Sound sensor. It cost less than...

Recent Comments